10
3M™MicroTouch™ System DST2270DX Integration Guide
3M Touch Systems, Inc. Proprietary Information – TSD-25739
Sensor Care and Cleaning
The sensor requires very little maintenance. 3M Touch Systems recommends that you
periodically clean the glass sensor surface.
CAUTION
To reduce the risk of the potentially hazardous situations associated with the use
of isopropyl alcohol which may result in minor or moderate injury or property
damage:
Follow all instructions and recommendations in the alcohol manufacturer's Material
Safety Data Sheet and product label.
Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning
agent for your sensor. You can also use straight isopropyl alcohol. Be sure to follow
solvent manufacturer's precautions and directions for use when using any solvents.
•
It is important to avoid using any caustic chemicals on the sensor.
•
Always dampen the cloth and then clean the sensor. Be sure to spray the cleaning
liquid onto the cloth, not the sensor, so that drips do not seep inside the display or
stain the bezel.
•
Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.
•
Always handle the sensor with care. Do not pull on or stress flex tail.
Important Notes for Video Displays
•
Plug power cord into appropriate power source.
•
Plug power cord into a grounded receptacle.
•
When unplugging power supply cord, pull on the plug not the cord.
•
Do not connect or disconnect this product during an electrical storm.
•
Install the display in a well-ventilated area. Always maintain adequate ventilation to
protect the display from overheating and to ensure reliable and continued operation.
•
Do not expose the display to direct sunlight or heat. Passive heat may cause damage
to the case and other parts.
•
Do not install the display in areas where extreme vibrations may be generated. For
example, nearby manufacturing equipment may produce strong vibrations. The
vibrations may cause the display to exhibit picture discoloration or poor video
quality.
•
Ensure that metal enclosures or bezels do not contact the sensor.
•
To avoid ergonomic concerns:
Do not install the display in a manner or location with awkward accessibility.
Extended use may result in muscle, tendon, or fixed posture strains. It is
recommended you take periodic breaks from continuous use.
