background image

FILTER CARTRIDGE 
REPLACEMENT 
INSTRUCTIONS:

NOTICE:

 

To reduce the risk associated with property damage due to water leakage 

or fl ooding,

 change disposable fi lter every six months or sooner.

NOTE:

 You do NOT need to shut off your water supply when changing your fi lter cartridge.  

 

The system will automatically shut off the water supply while fi lter is being changed. 

REPLACING FILTER

1.    Grasp cartridge and turn to the left briskly until cartridge will not turn any further.    

(Turn quickly to avoid pressure release that may result in leaks.)

2.   Gently pull cartridge downward to remove. 

3.    Align tabs of new fi lter cartridge with mounting bracket and insert new fi lter cartridge  

into the bracket. (Fig. 15) Turn cartridge to the right until cartridge stops. 

4.    Run water to fl ush 10 gallons (37.85 liters) through the system before use.  

 

(Approximately 5-7 minutes.)

7

TURN WATER ON:

1.    Turn the water back on at the    

 

cold water shutoff valve. (Fig. 14)

2.    Run water to fl ush 10 gallons (37.85 liters) 

through the system before use.   

 

(Approximately 5-7 minutes.)

3.    Check for leaks. If any dripping or leaking 

occurs, turn cold water supply off, tighten 
fi ttings and assure that tubing is pushed 
completely into fi ttings. 

 

YOUR SYSTEM IS NOW READY FOR USE. 

(Fig. 14) 

Water Leaks at Push-In Connections:

 

 Push tubing in as far as it will go. If leaking continues, shut off water at 
the shut off valve and remove water line by pushing in on the connector 
collar while pulling the tubing away. Inspect tubing for cracks and 
scratches. If tubing is cracked or scratched, simply cut that portion away 
and reinsert tubing into push-in fi tting.

Water Does Not Flow from the Drinking Water System Faucet:

 

 Check to see if the main water line valve is open, allowing water to fl ow to 
the fi lter.

Water Appears Cloudy or Air Comes Out of the Drinking Water System Faucet:

 

 Flush fi lter for a full fi ve (5) minutes to remove any carbon fi nes or 
trapped air in the fi lter and water lines.

For more information or questions

Call 800-388-3458

TROUBLESHOOTING GUIDE

Содержание Filtrete Standard

















Отзывы: