3M E-A-Rfit Скачать руководство пользователя страница 13

Страница: 13 / 40

Action Button Key

Throughout the Test Results section, there are various action buttons and checkboxes. See the table below for more

information on these options.

Red “X”

The binaural PAR minus uncertainty failed to meet the

target minimum attenuation. A failed measurement can

be set as a baseline, but you will not be able to assign a

hearing protector that has failed. Uncertainty is displayed

in the Detail View Tab.

Yellow Caution

Three conditions trigger this warning and the software

will alert the operator. The first condition is when the

attenuation value is less than 10 dB at 125 Hz. The second

condition is when there is a 15 dB or more difference

between the left and right PAR measurements. The third

condition occurs when octave-band attenuation values or

PAR value exceed defined limits, which may indicate a

blocked probe tube. In these cases, the pop-up will

suggest that the hearing protector be retested after

adjusting how it is worn or inspecting and possibly

replacing the test probe. You may mark a cautioned

measurement as a baseline, but you will not be able to

assign a hearing protector when a caution symbol is

present.

Grey Ellipses (dots)

The employee record does not have a noise exposure

level included. Without an employee exposure value,

protection sufficiency cannot be determined. You may

mark a grey measurement as a baseline, but you will not

be able to assign a hearing protector where protection

sufficiency cannot be determined.

Button/Checkbox

Description

End Session

Session Duration is the total test time for each employee

including each fit-tested hearing protector (if more than

one is tested). The session timer will start and stop when

a different employee is selected, or the session is ended

by the operator, and/or when the software is closed.

Retest Product

Immediately run a new test of the same product

Test Another Product

Opens the product selector to allow testing of another

product

Baseline

Will set a benchmark when the employee is first tested.

Once checked, the baseline will be stored in the history

column.

Assigned

When employee achieves adequate hearing protection

and a tested product is assigned to employee for use

while working in noise. Once checked, assigned products

will appear in the history column and be stored in the

database as the primary hearing protector.

Indicator Symbol

Description

Содержание E-A-Rfit









































Результаты поиска

Содержание E-A-Rfit

Отзывы:

Бренды по названию

Популярные бренды

3M E-A-Rfit, Инструкция пользователя

Результаты поиска

Содержание E-A-Rfit

Отзывы:

Бренды по названию

Популярные бренды