3M DBI SALA Flexiguard 8530433 Скачать руководство пользователя страница 35

GLOBAL PRODUCT WARRANTY, LIMITED REMEDY 

AND LIMITATION OF LIABILITY

WARRANTY:

 THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES OR CONDITIONS, EXPRESS 

OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE.

Unless otherwise provided by local laws, 3M fall protection products are warranted against factory 

defects in workmanship and materials for a period of one year from the date of installation or fi rst use 

by the original owner.

LIMITED REMEDY:

 Upon written notice to 3M, 3M will repair or replace any product determined by 

3M to have a factory defect in workmanship or materials. 3M reserves the right to require product be 

returned to its facility for evaluation of warranty claims. This warranty does not cover product damage 

due to wear, abuse, misuse, damage in transit, failure to maintain the product or other damage beyond 

3M’s control. 3M will be the sole judge of product condition and warranty options. 
This warranty applies only to the original purchaser and is the only warranty applicable to 3M’s fall 

protection products. Please contact 3M’s customer service department in your region for assistance.

LIMITATION OF LIABILITY:

 TO THE EXTENT PERMITTED BY LOCAL LAWS, 3M IS NOT LIABLE 

FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT 

LIMITED TO LOSS OF PROFITS, IN ANY WAY RELATED TO THE PRODUCTS REGARDLESS OF THE 

LEGAL THEORY ASSERTED.

GLOBALE PRODUKTGARANTIE, BESCHRÄNKTES RECHTSMITTEL 

UND HAFTUNGSBESCHRÄNKUNG

GARANTIE:

 FOLGENDES GILT STELLVERTRETEND FÜR ALLE GARANTIEN ODER BEDINGUNGEN, 

EINSCHLIESSLICH STILLSCHWEIGEND ANGENOMMENER GARANTIEN ODER BEDINGUNGEN 

HINSICHTLICH DER TAUGLICHKEIT ODER EIGNUNG FÜR EINEN BESTIMMTEN ZWECK.

Soweit gesetzlich nicht anders vorgeschrieben, werden bei 3M-Produkten für die Absturzsicherung 

werksseitige Mängel bei Verarbeitung und Material für einen Zeitraum von einem Jahr ab dem Datum 

der Installation oder der erstmaligen Benutzung durch den ursprünglichen Eigentümer garantiert.

BESCHRÄNKTES RECHTSMITTEL:

 Nach schriftlicher Mitteilung an 3M wird 3M jedes Produkt ersetzen 

oder austauschen, bei dem durch 3M ein werkseitiger Material- oder Verarbeitungsfehler festgestellt 

wird. 3M behält sich das Recht vor, die Rücksendung des Produkts an das Werk zur Beurteilung der 

Garantieansprüche zu verlangen. Unter dieser Garantie sind keine Schäden am Produkt gedeckt, die auf 

Verschleiß, Missbrauch, Transportschäden, Versäumnis der Instandhaltung des Produkts oder sonstige 

außerhalb der Kontrolle von 3M liegende Schäden zurückzuführen sind. 3M triff t allein die Entscheidung 

über Produktzustand und Garantieoptionen. 
Diese Garantie gilt ausschließlich für den ursprünglichen Käufer und ist die einzige, die für 

Absturzsicherungsprodukte von 3M maßgeblich ist. Kontaktieren Sie bitte die Kunden-Service-Abteilung, 

um Unterstützung zu erhalten.

HAFTUNGSBESCHRÄNKUNG:

 SOWEIT NACH GELTENDEM RECHT ZULÄSSIG, IST 3M NICHT 

HAFTBAR FÜR UNMITTELBARE, MITTELBARE, BESONDERE SCHÄDEN ODER FOLGESCHÄDEN JEDER 

ART, EINSCHLIESSLICH VON VERLUST VON GEWINN, DER IM ZUSAMMENHANG MIT DEN PRODUKTEN 

ENTSTEHT, UNGEACHTET DER ANGEFÜHRTEN RECHTSTHEORIE.

GARANTÍA GLOBAL DE PRODUCTO, COMPENSACIÓN LIMITADA 

Y LIMITACIÓN DE RESPONSABILIDAD

GARANTÍA:

 LAS SIGUIENTES DISPOSICIONES PREVALECERÁN SOBRE CUALQUIER GARANTÍA O 

CONDICIÓN, EXPRESA O IMPLÍCITA, INCLUIDAS LAS CONDICIONES O GARANTÍAS IMPLÍCITAS DE 

COMERCIABILIDAD O IDONEIDAD PARA UN FIN ESPECÍFICO.

Salvo que la legislación local estipule lo contrario, los productos de protección contra caídas de 3M están 

garantizados contra defectos de fabricación de mano de obra y materiales durante un periodo de un año 

a partir de la fecha de instalación o del primer uso por parte del propietario original.

COMPENSACIÓN LIMITADA:

 Tras recibir comunicación por escrito, 3M reparará o sustituirá los 

productos que considere que tienen un defecto de fabricación de mano de obra o materiales. 3M se reserva 

el derecho a solicitar la devolución del producto a sus instalaciones para evaluar las reclamaciones de 

garantía. Esta garantía no cubre los daños en el producto resultantes de desgaste, mal uso, uso indebido, 

daños durante el tránsito, mantenimiento inapropiado del producto o daños que escapen al control de 

3M. 3M será el único con derecho a determinar el estado del producto y las opciones de garantía. 
Esta garantía puede ser utilizada únicamente por el comprador original y es la única que cubre 

los productos de protección contra caídas de 3M. Si necesita ayuda, póngase en contacto con el 

departamento de servicios de atención al cliente de 3M.

LIMITACIÓN DE RESPONSABILIDAD:

 EN LA MEDIDA QUE LO PERMITA LA LEGISLACIÓN LOCAL, 

3M NO SE RESPONSABILIZARÁ DE LOS DAÑOS INDIRECTOS, FORTUITOS, ESPECIALES O 

RESULTANTES, INCLUIDA LA PÉRDIDA DE GANANCIA, RELACIONADOS DE MANERA ALGUNA CON 

LOS PRODUCTOS, INDEPENDIENTEMENTE DE LOS FUNDAMENTOS LEGALES QUE SE ALEGUEN.

GARANTIE PRODUIT INTERNATIONALE, RECOURS LIMITÉ 

ET LIMITATION DE LA RESPONSABILITÉ

GARANTIE :

 LES DISPOSITIONS SUIVANTES SONT PRISES EN LIEU ET PLACE DE TOUTES LES GARANTIES 

OU CONDITIONS, EXPRESSES OU IMPLICITES, Y COMPRIS LES GARANTIES OU CONDITIONS IMPLICITES 

DE QUALITÉ MARCHANDE OU D'ADAPTATION À UN USAGE SPÉCIFIQUE.
À moins d’un confl it avec une législation locale, les produits antichute de 3M sont garantis contre les défauts 

de fabrication en usine et de matériaux pendant une période d'un an à compter de la date d'installation ou 

de la première utilisation par le propriétaire initial.

RECOURS LIMITÉ :

 Sur demande écrite à 3M, 3M s’engage à réparer ou remplacer tout produit considéré 

par 3M comme souff rant d’un défaut de fabrication en usine ou de matériaux. 3M se réserve le droit d’exiger 

que le produit lui soit retourné pour une évaluation de la réclamation au titre de la garantie. Cette garantie 

ne couvre pas les dommages du produit liés à l’usure, aux abus, à la mauvaise utilisation, aux dommages 

liés aux transports, au manque d’entretien du produit ou tout autre dommage indépendant du contrôle 

de 3M. 3M sera l’unique juge de la condition du produit et des options de la garantie. 
Cette garantie ne s’applique qu’au propriétaire initial et elle constitue l’unique garantie s’appliquant aux 

produits antichute de 3M. Veuillez contacter le service à la clientèle 3M de votre région pour obtenir de 

l’assistance. 

LIMITATION DE LA RESPONSABILITÉ :

 DANS LES MESURES PERMISES PAR LA LÉGISLATION 

LOCALE, 3M N’EST PAS RESPONSABLE POUR TOUT DOMMAGE INDIRECT, ACCESSOIRE, SPÉCIFIQUE OU 

CONSÉCUTIF, Y COMPRIS, MAIS SANS S'Y LIMITER, LA PERTE DE PROFITS, LIÉE DE QUELQUE MANIÈRE 

QUE CE SOIT AUX PRODUITS, MALGRÉ LA THÉORIE JURIDIQUE REVENDIQUÉE.

Содержание DBI SALA Flexiguard 8530433





































Отзывы: