Control Valve Function and Cycles of Operation
The AC adapter comes with a 15 foot power cord that is designed for use with the control valve.
The AC adapter is for dry location
use only.
If the power goes out, only the time of day needs to be reset. All other settings are permanently stored in the non-volatile
memory.
The following chart shows the time for the backwash and rapid rinse cycles for the three available programming options.
Regeneration Cycles and Times for Different Programs
Program Number
Length of Cycle Times (Minutes)
BACKWASH (C1)
RAPID RINSE (C4)
P7
6
4
P8
10
6
P9
14
8
3-10
Note:
Your Iron Reduction System is factory preset to program number P7, changing the setting to P8 or P9 is rarely needed. But if
a change is desired, please refer to
“How to Change the Regeneration Program Settings”
on page 3-9.
Содержание APIF100
Страница 2: ......
Страница 22: ...3 13 Figure 10 Figure 11 Figure 8 Figure 9 ...
