3M 963, Инструкция по эксплуатации

Страница: 3 / 11

4
CAUTION
• The 963 is designed for use in those areas using AC 120V electrical service,
while the 963E runs off of DC24V power, supplied by a universal power
supply capable of converting AC 100-240V electrical service. Usage of
either unit with the incorrect electrical voltage could result in incorrect
performance and an unsafe operating condition.
• The 963/963E has no user-serviceable parts. Do not remove the grill or
disassemble the unit in any way. If service other than that recommended in
this manual is needed, please contact 3M for information. UNAUTHORIZED
SERVICE WILL VOID THE WARRANTY.
• The 963/963E is NOT designed for usage in hazardous environments where
the possibility of explosion or fire exists.
• When cleaning the 963/963E housing or emitter points, verify that the unit is
off and disconnected from electrical power. Collected dirt on this unit should
be removed regularly to prevent accumulation that may result in fire.
• Class 1 equipment.
Explanation of Symbols
– Caution: refer to user instruction manual.
– High voltage present inside unit.
Read and understand all safety information before installing and operating this
equipment.
Safety Information
Intended Use
The 3M™ 963/963E Benchtop Air
Ionizer is designed to generate and
deliver a stream of ionized air. Its
intended use is to neutralize excess
static electricity buildup on electronic
devices and work surfaces. It is meant
to function as a stand alone device. The 963/963E Benchtop Air Ionizer is
not intended to supplant proper
grounding of personnel as the
preferred method of controlling
electrostatic buildup and preventing
hazardous discharge.