![background image](http://html1.mh-extra.com/html/3m/710/710_instructions-manual_443274012.webp)
1
78-815-304--E
6.0 Crimping Bridge/Splice Module Combinations with the Bridge Module
to 3M 710-BSP Splice Presser
6.1 Properly position the two modules or the cap/module
combination to be pressed together, and pre-crimp
them as much as can easily be done by hand.
6.2 Preset rough open jaw height by using the height
adjustment nut and the adjustment guide grooves.
Top groove: Bridge pressing
Bottom groove: Cap pressing
Adjustment Guide
Grooves
Note: Make final adjustment using the height adjustment
nut as required.
Height
Adjustment
Nut
6.3 When pressing a 710 bridge module onto a 710
splice or half-tap module, insert the module
combination between the jaws of the 3M 710-BSP
Presser, cap first, with the 710 splice or half-tap
module flush against the lower jaw of the tool. Insert
the module combination until the cap rests firmly
against the back wall of the lower jaw.
Содержание 710
Страница 1: ...January 2007 78 8125 3042 2 E 710 Splicing Rig Instructions ...
Страница 2: ... 78 8125 3042 2 E ...
Страница 19: ...19 78 8125 3042 2 E ...