1
78-815-304--E
8.5 Hold back the blade guard and use finger pressure
on the metal ends of the new blade assembly to
insert it behind the stuffer teeth into the blade slot of
the “T” bar.*
*Note: For proper operation you must ensure the blade
guard moves freely on both sides of the blade
assembly.
3M Logo
& flat side
of blade
facing up
8.6 Looking at the center of the “T” bar faceplate, align
the tips of the red stuffer with the mid-point of the
individual blade tips of the cutter blade. Use the
3mm hex wrench to
lightly-tighten
the two (2)
screws on the faceplate.
Содержание 710
Страница 1: ...January 2007 78 8125 3042 2 E 710 Splicing Rig Instructions ...
Страница 2: ... 78 8125 3042 2 E ...
Страница 19: ...19 78 8125 3042 2 E ...