3M 3MWTS Series Скачать руководство пользователя страница 2

Страница: 2 / 24

2 | 3MWTS Series Water Softeners – Installation Instructions

3MWTS Series Water Softeners – Installation Instructions | 3

Table of Contents

Section 1:

Before installation

Section 2:

Installing your water softener

Section 3:

Control valve programming and regeneration

Section 4:

Maintenance

Section 5:

Control valve troubleshooting guide and service instructions

Section 6:

System troubleshooting guide

Section 7:

Specifications and operating data

Section 8:

3MWTS Series Performance Data Sheet

Section 9:

Component and Part List

Section 10:

Warranty registration card

SAFETY INFORMATION

Read, understand, and follow all safety information contained in these instructions prior to installation and use of the 3MWTS

Series Water Softener. Retain these instructions for future reference. Failure to follow installation, operation and maintenance

instructions may result in property damage and will void warranty.

Intended use:

The 3MWTS Series Water Softener is intended for use in softening water in homes and has not been evaluated for other

uses. The system must be installed indoors near the point of entry of a home water line and be installed by qualified

professional installers according to these installation instructions.

EXPLANATION OF SIGNAL WORD CONSEQUENCES

WARNING

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious

injury and/or property damage.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate

injury and/or property damage

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in property damage.

Содержание 3MWTS Series

























Результаты поиска

Содержание 3MWTS Series

Отзывы:

Похожие инструкции для 3MWTS Series

Бренды по названию

Популярные бренды

3M 3MWTS Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 3MWTS Series

Отзывы:

Похожие инструкции для 3MWTS Series

Бренды по названию

Популярные бренды