3M 3M-Matic a20, Инструкция и перечень запасных частей, Страница: 29 / 118

19 2011 April
a20-NA
7.10 Inspection of Phases
(For Three-Main Phases Only)
(N/A for this machine)
7-INSTALLATION
(continued)
7.7 Completion of Taping Heads
See Manual 2 for Complete Instructions.
Important –
Do not cut against the apply roller -
roller damage could occur.
7.8 Preliminary Electric Inspection
Before connecting the machine to the mains, please
carry out the following operations:
7.8.1
Make sure that the socket is provided with an
earth protection circuit and that both the mains
voltage and the frequency match the speci fi -
cations on the name plate.
7.8.2
Check that the connection of the machine
to the mains meets the safety regulations in
your country.
•
To reduce the risk associated with sharp
blade hazards:
−
Keep hands and fi ngers away from tape
cutoff blades under orange blade guards.
The blades are extremely sharp.
WARNING
7.9 Machine Connection to the Mains
- Push the LATCHING EMERGENCY STOP
BUTTON.
- The main switch is normally turned OFF.
Connect the power cord supplied with the machine
to a wall socket using a plug which complies with the
safety regulations of your country.
7.8.3
The user will be responsible for testing the
short-circuit current in its facility and should
check that the short-circuit amperage setting
of the machine is compatible with all the
components of the mains system.
•
To reduce the risk associated with
mechanical and electrical hazards:
−
Read, understand, and follow all safety
and operating instructions before operating
or servicing the case sealer.
•
To reduce the risk associated with
hazardous voltage:
−
Position electrical cord away from foot
and vehicle traf fi c.
WARNING