3M 3M-Matic a20, Инструкция и перечень запасных частей, Страница: 26 / 118

16
6.1 Uncrating
The envelope attached to the shipping box contains
the uncrating instructions of the machine
(Figure 6-1).
Cut straps. Cut out staple positions along the
bottom of the shipping box (or remove staples
with an appropriate tool
- Figure 6-2)
After cutting out or removing the staples, lift the
shipping box in order to clear the machine
(two persons required).
Transport the machine with a fork-lift truck
to the operating position.
Lift the pallet at the point indicated in
Figure 6-3
(weight of m pallet = see
Section 4
).
Removal of Pallet
Using a 10mm combination wrench, remove the
fasteners that secure the case sealer legs to pallet at
each leg (as shown in
Figure 6-4).
6.2 Disposal of Packaging Materials
The
a20
package is composed of:
- Wooden pallet
- Cardboard shipping box
- Wooden supports
- Metal fi xing brackets
- PU foam protection
- PP plastic straps
- Dehydrating salts in bag
- Special bag of laminated polyester/aluminium/
Polyethylene (sea freight package only)
- Polyethylene protective material
For the disposal of the above materials, please follow
the environmental directives or the law in your country.
6-UNPACKING
Figure 6-1
Figure 6-2
Figure 6-4
Figure 6-3
2011 April
Using a 3mm hex wrench, remove the Height
Adjustment Handle and reinstall it with the handle
pointing upward as shown in
Figure 6-5.
a20-NA
Fasteners
Remove the leg height adjustment cap screws and
replace with the cap screws from the tool kit. Loosen
both cap screws. Remove and replace them one at
a time to keep the inner threaded plate in position.
Figure 6-5