manualshive.com logo in svg

3M 3M-Matic 800rf, Инструкция и перечень запасных частей

Поделиться
Скачать
3M 3M-Matic 800rf Скачать руководство пользователя страница 67

55 

16.3  Spare Parts Order

16-TECHNICAL DOCUMENTATION AND INFORMATION 

(continued)

2012 March

800rf-NA 

Replacement Parts Ordering Information and Service

Refer to the 

fi

 rst page of this instruction manual "Replacement Parts and Service Information".

Tool Kit

A tool kit, part number TBA, is supplied with the machine.  The kit contains the necessary open end and hex socket 
wrenches for use with the metric fasteners on the case sealer.  The threading tool, part number 78-8076-4726-4, 
contained in above kit is also available as a replacement stock item.  

Label Kit

In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety.  
A label kit, part number 78-8098-9177-9 is available as a stock item.  It contains all the safety labels

 

used on

the 800rf Random Case Sealer.

The following parts are normal wear items and should be ordered and kept on hand as used.

Qty. Part 

Number 

Description

 

4 

78-8054-8841-4 

Belt – Drive W/Pin

Also see Manual 2 for recommended taping head spare parts.

 

Содержание 3M-Matic 800rf



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды