3M 16212, Инструкция по эксплуатации, Страница: 27 / 28

27
Accessories
HVLP Models
Air Pressure Verification Kit 16231
For use in checking air cap atomizing air pressure. Not
to be used for actual spraying.
Install the kit air cap on the gun. Turn on the air to the
gun, then trigger the gun and read the air pressure on
the gauge.
NOTE: To be “HVLP compliant”, the atomizing air
pressure must not exceed 10 psi (70 kPa, 0.7 bar).
TI6341A
Dimensions
TI3618B
6.7 in.
(170 mm)
7.6 in.
(193 mm)
Technical Data
Category Data
Maximum Working Air
Pressure 100 psi (0.7 MPa, 7 bar)
HVLP and Compliant
Maximum Compliant
Inbound Air Pressure
29 psi (200 kPa, 2.0 bar)
HVLP at 10 psi (70 kPa, 0.7
bar) max at air cap
Air Consumption HVLP at 29 psi (200 kPa,
2.0 bar) = 15.5 scfm
Compliant at 29 psi (200 kPa,
2.0 bar) = 11.2 scfm
Airspray at 50 psi (345 kPa,
3.4 bar) = 14.1 scfm
Fluid and Air Operating
Temperature Range 32 F to 109 F (0 C to 43 C)
Weight 22.3 oz. (632 g)
Air Inlet 1/4–18 npsm
Wetted Parts 304 and 303 Stainless Steel,
PEEK, Acetal, Ultra High
Molecular Weight Polyethylene
Noise Data*
Sound Pressure
Sound Power 84.4 Db(A)
94.0 Db(A)
*
All readings were taken with the gun controls fully open
and with 40 psi (280 kPa, 2.8 bar). Sound pressure was
tested to CAGI–PNUEROP–1969. Sound power was
tested to ISO 3744–1981.