3M 1000, Руководство пользователя

Страница: 118 / 121

Appendix C
Disposal of the 3M Compact RFID Reader 1000
106 3M Compact RFID Reader 1000 User’s Guide
C
Disposal of the 3M Compact RFID Reader 1000
Prior to disposing of the 3M Compact RFID Reader 1000, the battery must
be removed. The battery used in the 1000 is a Lithium/Manganese Dioxide
(Li/MnO2) type. This battery contains no measurable amounts of mercury,
lead, or cadmium.
Caution:
The procedure outlined in this appendix requires opening the 3M Compact
RFID Reader 1000 case in order to remove the battery prior to disposal.
Opening the case of the 1000 will void the warranty. In addition, opening the
case may adversely affect future performance of the reader.
Never open the case of the 1000 unless you are going to remove the battery
and dispose of the unit.
All disposal operations must be performed within local guidelines and laws. It
is the responsibility of the reader owner to ensure all local and regional laws
and regulations are followed for proper reader disposal.
To remove the battery, perform the following:
1 Remove the reader from service and disconnect any power, antenna,
and communication cables.
2 Place the reader on a static protected surface.
3 Turn the reader so the bottom of the reader is facing up as shown in the
following figure.
4 Using a Torx screwdriver, remove the six (6) Torx screws securing the
reader base to the reader enclosure.
5 Lift the base off the enclosure.
6 Remove the retaining nuts on each antenna connector
7 Remove the two (2) retaining nut/screws on each side of the serial
connector.