Assemble Panels
The front panels are made from thicker 1/4" acrylic to provide more structural rigidity where
needed: the door. Do not try to bend the 1/4” acrylic! The remaining panels are all 1/8”.
1. The Front Panel
Each of the corners of the enclosure will be held together by the connectors pictured
below. There are only two versions, L and R, which can be identified by the letters
stamped on the inside. The opposite connectors are identical, i.e., Bottom Right is the
same as Top Left. In all cases, the surface of the connector with the cutout pattern
faces front or back.
The front door is designed so that the latches are on the left. Attach the corner
connectors on the
backside
of the door frame using the provided cap head 12mm
Copyright 2021 3DUPfitters LLC
8
Top Left
Top Right
Bottom Left
Bottom Right
