3DUpFitters CR-10 Max Enclosure Kit, Инструкция по эксплуатации

Страница: 16 / 23

7. Sealing Gaps
Once the enclosure is completely put together, it is time to make sure that each of the
panels is held tightly to each adjoining panel. The connectors are designed with a
small amount of play that allows you to make small adjustments for the perfect fit.
1. Loosen screws on the panel to move.
2. Push that panel into place. You may need a friend to hold it tightly in the right spot.
3. Re-tighten the screws to hold the panel. Only tighten enough to hold the pieces
snuggly.
DO NOT OVER-TIGHTEN!
These parts are sturdy, but they’re still all made
out of plastic..
Repeat the product, going around the enclosure looking to make sure all of the panels
are flush to each other.
8. Spool Holder
Filament is fed into the enclosure
from the included top/side
mounted spool holder. You are of
course, welcome and encouraged
to DIY your own solutions if this
doesn’t fit your needs. Creating
new spool holder designs seems
to be a favorite pastime of 3D
printer owners.
First assemble the cross piece
using the included M4 14mm
screws and M4 nuts.
Copyright 2021 3DUpfitters LLC16