3DUpFitters CR-10 Max Enclosure Kit, Инструкция по эксплуатации, Страница: 7 / 23

Identify Panels
Before you start to assemble the kit, lay out all of the panels and identify which panel
corresponds to the front, left, right, back, and top. Although the panels are labeled, it’s
easy to get them mixed up once the covering is removed, and very rarely a panel can
be mislabeled. This chart will help you keep them straight. Note the panels are shown
as they appear if you are located on their corresponding sides, i.e. the right side is
pictured as if you were standing on the right side of the enclosure, etc.
PANEL PICTURE HEIGHT WIDTH
FRONT 32” 27.44”
RIGHT 32” 40”
LEFT 32” 40”
PANEL
Copyright 2021 3DUpfitters LLC 7