25 mm stainless steel bolts (3)
10 x 4.7 SF (normal) propellers (1)
10 x 4.7 SFP (pusher) propellers (2)
You will need a 5.5 mm (7/32) wrench for minor assembly. We also
recommend a 2 mm (5/64) hex wrench for tightening propellers.
Thank you for purchasing a 3DR Y6!
Your 3DR Y6 comes fully assembled. Just complete this unboxing guide,
and your copter is ready to fly.
Micro USB cable
1
Unfold blue arms
Your copter’s blue arms indicate its front-facing direction and arrive
folded for ease of transport.
UNBOXING
Locate the bolts at the corners of the body plate outside the blue arms.
Remove both bolts and nuts. These bolts will secure the blue arms in
place.
Remove outer bolts
CONTENTS
Metal nuts (3)
4 mm JP1 jumper connector
6 mm PPM jumper connector
3DR Y6 copter
11 x 4.7 SFP (pusher) propellers (1)
11 x 4.7 SF (normal) propellers (2)
