8
Step 7: Let’s Switch to PLA Plastic!
PLA Plastic
ABS Plastic
The color of the
Plastic will
change once the
PLA starts
extruding. It will appear mixed
at first.
STOP extrusion by
pushing either button once.
SLOW
FAST
Click
FAST or SLOW once to
continue extruding the
PLA
Plastic and Doodle as you wish.
Step 8: Power Down
Move the
Control Switch
to
OFF.
After 5 minutes of inactivity, the
3Doodler ’s heating
system will automatically power down. You will need to press one
of the
Speed Buttons OR toggle the Control Switch OFF and then
ON again to continue use.
SECTION 3: TROUBLESHOOTING
Tools (Provided in Box)
Before showing you how to troubleshoot issues
with your 3Doodler , we want to introduce
you to three handy tools provided in your box:
Mini Spanner
Used for tightening and
removing the
Nozzle.
Do not remove Nozzle
when Pen is cold.
Do not overtighten the
Nozzle, as you may
break it.
Unblocking Tool
Used for pushing short
pieces of
Plastic down
into the
Drive Gear to
help with extrusion
from
Pen.
Mini Screwdriver
Keep this handy
for removing the
Maintenance Cover.
Keep this handy
for removing the
Maintenance Cover
or rotating the
Temperature Adjuster
(See the3doodler.com/
temperature)
With those introductions over, it’s time to look
at the different issues that may arise with your
3Doodler and steps to get back
to Doodling.
3Doodler_Bob_User_Manual_MAIN_Inner_20180511.indd 8
11/5/2018 11:37 AM
