TMA Grand Master 2.1 – User’s Guide
5 Using TMA Grand Master
2. The Layout Editor window is displayed.
3. When you create a new pattern, you define the block layout. Type the name of your new layout
into the
Layout Name
textbox (maximum length is 20 characters).
4. When working with special blocks that have different sizes than displayed by default, activate
the
Custom Block Size
function and set the correct measurements.
5. Select a value at the
Tool
Diameter
section for the puncher and the drill bit sizes.
6. Select the size of the
Gap
between the holes.
7. Select the number of
Columns
and
Rows
.
8. Pattern alignment can be set at the
Alignment
pane of the window.
April 8, 2014 – Rev. 1
3DHISTECH Ltd.
36(79)
