3devo GP20 Hybrid, Руководство пользователя

Страница: 67 / 92

63
Step 9) Slide the front plate back on the shafts. Make sure the front plate
is cleaned properly around the cylindrical bushings.
Step 10) Start by placing one thin nut per shaft and tighten the nuts a little
bit at a time. Even tightening is important to avoid imbalances in the stacked
blades.
Step 11) If both thin nuts are tightened and there is no play in the
shredder blades, the nylon locking nuts can be placed and tightened against
the thin nuts. This ensures a proper holding force for the stacked blades.