3devo GP20 Hybrid, Руководство пользователя

Страница: 50 / 92

46
3.5. ADJUSTING AND MAINTENANCE
For all adjustments and maintenance activities to the machine, make sure to turn
the machine off and remove the power cable.
3.5.1. HOPPER ADJUSTMENTS
3.5.1.1. ADJUSTING THE FEEDING APERTURE
The feeding aperture of the hopper can be adjusted to control the amount of
material that is allowed to pass through to the machine. Excess material remains
in the feeding area until the path is cleared. The size of the feeding aperture
depends on;
• the size of the input material and;
• the amount of material that can be fed at once to the machine.
If you only have a GP20 Granulator , the hopper has an additional barrier that
prevents upward flying material. This barrier reduces the pass-through size at the
bottom of the hopper. To minimize the chance of blockages, it is advised not to set
the feeding aperture larger than the aperture at the bottom of the hopper.
To adjust the feeding aperture, simply loosen the thumb screws on both sides of
the hopper and set the plate to the desired position. Finally, tighten the thumb
screws to fix the plate in place.