Preparation 3D-Printer » Remove Extruder Drive Motor
Version 1.0
8 von 25
5.
Remove Extruder Drive Motor
•
Unscrew the screws of the extruder drive motor.
•
Remove the extruder drive motor.
i
It could look different with your 3D-printer to the visualization shown above.
Make sure the 3D-printer is disconnected from the power supply.
i
If it is necessary for dismounting the extruder drive motor, unplug the extruder drive motor cable
temporarily from the mainboard of your 3D-printer. Remember the plug position on your
mainboard.
