3d-printz Naughty 2000, Инструкция по эксплуатации

Страница: 8 / 9

Naughty is made for servos in the 12mm class. These fit perfect: Savöx SH-0264MG
or SG 90 or similar. You´ll ned 6 pcs. If you want to modify the servofittings to your
needs in the CAD you can use the Stepfiles that come with the Download.
batterysuggestion: 3S Lipo, 2200mah, 25C
Motor:
HK NTM 2836 (available in different KV)
...or similar
ESC: ESC with BEC, 40-50 A
Prop: please choose a foldingprop corresponding to your motor/esc combo!
throws
Using the suggested CG of 55mm behind leading edge following throws are a good
starting point:
Aileron: +/- 20mm
Elevator: +/- 10mm
Rudder: Maximum
Camber (Thermal): -3mm
Speed: +2mm
Butterfly/Crow:
Flaps -30mm
Ai25mm
Elevator -2mm
Please try the Crowmode at sufficient height before you use it to land your
Naughty!
CG
The right center of gravity is essential for comfortable flight behavior. This is
precisely why it should be dialled in individually. The initial value can be assumed
to be approx. 55 mm behind the leading edge. If more power and more agile flight
behavior is desired, the center of gravity can be shifted further back, but the
throws should then also be adjusted.