3D Perception COMPACTVIEW SX60, Руководство пользователя

Страница: 34 / 55

3D perception C
OMPACT
V
IEW
SX60
Revision 2 User Manual
29
15.5 S
ET
-U
P
S
UB
M
NEU
keystone V
Adjust
vertical keystone correction.
Compensates for the geometrical distortion of
the projected image resulting from tilting the
projector to shoot higher up on the wall.
keystone H
Adjust
horizontal keystone correction.
Compensates for the geometrical distortion of
the projected image resulting from shooting
the image at an angle sideways to the screen.
IR control
Activate and deactivate the IR sensors used
for remote control. The projector contains one
front and two rear, in total three double IR
sensors.
IR front, back (left), back (right)
Enable or disable IR receiver.
DPMS
Activate/deactivate DPMS (Display Power Management Signalling). When DPMS is on, the
projector will switch off following the powering off or disconnection of the signal source. The
projector will switch back on when the signal source is reactivated.
source scan
Switches source scan on and off. With source scan on, the projector will search for another
source if the current source is disconnected or switched off. With source scan off, the projector
will remain at the selected source input even if the source is switched off or disconnected.
orientation
Select between desktop front, desktop rear, ceiling front and ceiling rear mode. The image will
be flipped and reversed accordingly.
OSD
Select where to have the On Screen Display.
language
Select between languages.
RGB video
Selects RGB video on the component video input (YPbPr). Requires composite sync connected
to the composite video input.