3D Perception COMPACTVIEW SX60 Скачать руководство пользователя | Manualshive

Страница: 29 / 55

background image

3D perception

C

OMPACT

V

IEW

SX60

Revision 2

User Manual

24

14.

U

SING THE

P

ROJECTOR

After Set-up, switch on all equipment.

The  projector  can  be  controlled  by  the  keypad  on  the  rear,  by  the  remote  control  or  using  the
RS232 or LAN interfaces.

When  using  the  remote  control,  either  all  or
select  individual  units  may  be  addressed,  see
the  CONTROL  sub  menu  -  RC  ID.  By
activating the RC ID, individual control of units
in a multiple-unit set-up is then made possible.

To switch the projector on, firmly press the POWER button on the keypad or the remote control.

The STATUS indicator will turn from yellow to green when the unit is switched on. The keypad
will light up so that all available functions are yellow. Functions not available will have no light.
Selected functions will turn green.

If the STATUS indicator is flashing yellow, please wait until it turns permanent yellow.

When only one source is connected, the projector will auto-detect that source. If more sources
are connected, the projector will search for the next active source according to the following list,
provided that SOURCE SCAN is set to ON in the SET UP sub menu (see description of menu
system):

•

VGA

•

BNC

•

DVI-D

•

YPbPr (Component)

•

S-Video

•

C-Video

Select  between  the  sources  by  pressing  the  SOURCE  buttons  on  the  keypad  or  the  remote
control. Only sources that are active will be displayed.

If no source is active, searching messages will appear on the screen. If no source is active for a
long time, the projector will go in standby mode if DPMS (power save) is set to ON in the SET
UP  sub menu. The  STATUS  indicator will  turn  from  green to flashing  yellow,  then  yellow.  The
projector will be switched back on if at least one source is (re)activated.

The power-down function can be disabled in the menu. See DPMS in the SET UP sub menu.

To switch the projector off, firmly press the POWER button on the keypad or the remote control
twice (to confirm that you really want to switch off the unit). The STATUS indicator will turn from
green to flashing yellow, then yellow when switched off.

You  may  not  switch  the  unit  on  while  the  STATUS  indicator  is  flashing  yellow.  Wait  until  the
indicator is permanent yellow.

«
...
27
28
29
30
31
...
»

Содержание COMPACTVIEW SX60
























































Отзывы:

Нет отзывов

Похожие инструкции для COMPACTVIEW SX60

NP41 - TECHNISCHE DATEN

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 44

Бренд: NEC Страницы: 16

Nighthawk XT4100

Бренд: NEC Страницы: 11

Бренд: NEC Страницы: 3

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 6

Бренд: NEC Страницы: 6

Бренд: NEC Страницы: 6

Бренд: NEC Страницы: 151

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 3

Бренд: NEC Страницы: 8

Бренд: NEC Страницы: 17

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды