3D perception
C
OMPACT
V
IEW
SX60
Revision 2
User Manual
21
11.
L
AMP
O
PERATION
The projector is fitted with two individual projection lamps that can be run in various modes. In
addition, lamps can be replaced as needed separately. This ensures an optimized cost of
ownership. Individual lamp timers are maintained for each lamp.
Lamp operation mode is controlled in the LAMPS sub menu.
12.
PIN
C
ODE
The projector may be controlled by a PIN (Personal Identity Number) code. The PIN code is 4
digits, and if the PIN code is activated, you must issue the right code to unlock the projector.
To activate the PIN code, see the UTILITIES sub menu.
If a wrong PIN code is entered, you have two more attempts to enter the correct code. If an
incorrect PIN code is entered three times in a row, a PUK (PIN unlock) code is needed. The
PUK code is supplied with the product.
If you also fail three times with the PUK code, the projector locks up permanently, and can only
be unlocked by a special service unlock code.
To access this code, you will need to contact your dealer or a service station. The service
unlock code will be generated based on a secure, encrypted number that is produced by the
projector itself. The projector will produce a new number every time.
