Media Jams
QMS 1725E Print System Operation
6-8
4
Is the printer printing codes or not printing at all when in
ESP mode?
n
Reconfigure the port to the specific printer emulation of
the file you are trying to print. See chapter 4, “Printer
Configuration,” in the
Reference
guide for instructions, or
use the PS Executive Series Utilities to change modes.
n
If a PostScript file prints PostScript emulation statements
while in ESP mode, increase the ESP timeout. See chap-
ter 4, “Printer Configuration,” in your
Reference
guide to
change it from the control panel, or use the PS Executive
Series Utilities.
n
If you continue to have problems with the ESP mode
selecting the appropriate printer emulation, contact your
QMS vendor.
5
If nothing prints at all, do an engine test print.
On the front of the printer below the control panel and above the
power switch is a line indentation with an opening. Insert a pen or
end of a paper clip into the opening until you hear a slight click.
This should produce a page with vertical lines from one end to the
other. If the test print shows any pattern other than this, contact
your QMS vendor.
Media Jams
Locations
When a media jam occurs, the media path graphic on the printer's
control panel lights in the area closest to the location of the jam and a
paper jam message displays in the message window. Frequent jams
in any area indicate that area should be checked, repaired, or
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
