Printing
Transparencies
QMS 1725E Print Sytem Operation
2-8
1
After selecting manual feed in the Operator Control menu,
adjust the manual feed guides on the upper or lower paper
cassette to match the width of media you are using.
2
Insert the media along the guides as far as it goes.
The media is automatically fed into the printer, and the printed
media is forwarded to the selected output bin.
Printing Transparencies
You can also print transparencies for overhead projectors. Use only
transparencies recommended for laser printers, such as Canon brand
type D and 3M type PP2500. Always use manual feed from either the
upper or lower paper cassette, and the face-up output bin at the back
of the printer. Remove each transparency from the face-up bin after
printing to avoid jams. Transparencies must withstand temperatures
up to 356° F (180° C). Other specifications on overhead transparen-
cies are
n
Thickness: 0.111 to 0.113 mm (4.37 to 4.45 mils)
n
Cutting Dimension Tolerance: +/-0.7 mm (0.031")
n
Cutting Angle: 90° (+/- 0.2°)
Manual feed guide
(right)
Manual feed guide
(
left
)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
