TD_UserManual_SCALEREO-Desk_13xyyC
Rev. 1.4 / 25.02.2022
5
/ 29
1. General
1.1 Introduction
Thank you for purchasing this device. With this high-quality product, you have acquired a very
innovative system that offers you a unique, spatial perception and experience when viewing
microscopic specimens and significantly enhances your day-to-day work.
Please read this user manual completely and carefully before unpacking, and thus before using
the system for the first time. Within this document, the terms "system", "product" and "device"
are mostly used synonymously and always refer to the complete system as a unit with all asso-
ciated devices and assemblies listed under 1.3.1, unless otherwise stated.
3D Global Solutions GmbH reserves the right to make changes to its products, their documen-
tation or specifications without prior notice. All information and functions described in this doc-
ument refer to the device status (hardware & software) at the time of delivery ex-factory. Func-
tions or behaviour of any updates carried out subsequently are not described in this user man-
ual. The latest documents are available for download at
. Please check this page
from time to time for information on the latest changes.
All information given here has been carefully checked, but no guarantee can be given for its
correctness and/or completeness.
The datasheet supplied with the system contains all relevant technical data on the system and
is to be regarded as an integral part of this user manual. This user manual forms an integral
part of the device and must therefore always be kept available for reference and passed on if
the device is sold.
The type plate of the device contains various symbols whose meaning is described here:
Before using the device for the first time, read this user manual completely and
carefully, as it contains among other things important safety instructions.
The device may only be operated in closed rooms. For more information, please
refer to the “Safety” section starting on page
8 of this user manual.
1.2 Purpose of this document
The purpose of this user manual is to assist you in commissioning and operating the device. In
addition, this document is intended to draw your attention to possible risks during unpacking,
commissioning and use of the device, and to highlight measures for avoiding risks.
If you do not fully understand any points in the user manual or if you have any questions, please
contact the Support department at 3D Global Solutions GmbH. A lack of or insufficient
knowledge of this user manual will result in the loss of any liability claims against the manufac-
turer.
This user manual describes the special functions of the “SCALEREO
-
Desk” digital 3D video
microscope system with hardware and software version 01.02.2022. The system may be avail-
able in different versions with possibly different appearance or different functions. For this rea-
son, not all illustrations or functions described here may apply exactly to all available versions.
