9
Installing the Ailerons
Glue the aileron sections together. Insert the hinges into the aileron first and test fit the
aileron to the wing.
NOTE: The hinge length may need to be trimmed slightly if the aileron does not seat all the
way into the hinge slot.
IMPORTANT! Only 2 drops of CA is needed for each slot for the hinges. Too much CA and
the hinge will bind and be unusable.
TIP: After adding the CA, use a tissue to wipe away the excess.
10
Mount the wingtips to the wings using two m2 screws per wing.
11
Install the wings to the fuselage using four m2 screws per wing.
12
Glue the sections of the canopy together.
13
Glue the magnets into the canopy and fuselage.
Содержание X-88 Fun-Jet
Страница 1: ...ASSEMBLY MANUAL AND USER GUIDE X 88 FUN JET v4 1 Light jet issue By 3D AEROWORKS...
Страница 4: ......