4
a
-
Cut two 70mm lengths of LED strip and solder a 30mm length of power wire to one
end.
-
Install the led strips into the front section of the vertical stabilizer with the led strip
facing outward. The power chord needs to be accessible from the opening as it will be
soldered to the wing later on.
WING ASSEMBLY
5
a
-
Test fit the sections of the wing together.
-
Cut two 380mm (front slot), two 350mm (middle slot) and two 250mm (rear slot)
lengths of led strip to be fitted into the wings.
Содержание X-88 Fun-Jet
Страница 1: ...ASSEMBLY MANUAL AND USER GUIDE X 88 FUN JET v4 1 Light jet issue By 3D AEROWORKS...
Страница 4: ......