3Com VCX V7122 SIP, Руководство пользователя

Страница: 93 / 176

3Com VCX V7122/SIP VoIP Gateway User Manual
93
Format of the Call Progress INI File
The Call Progress Tones section of the INI file format starts from the following string:
ƒ [NUMBER OF CALL PROGRESS TONES] – Containing only the following key:
ƒ Number of Call Progress Tones – Defines the number of Call Progress Tones to
be defined in the file.
ƒ [CALL PROGRESS TONE #X] – Containing the Xth tone definition (starting from 1 and
not exceeding the number of Call Progress Tones defined in the first section) using the
following keys:
ƒ Tone Type – Call Progress Tone type
1. Dial Tone
2. Ringback Tone
3. Busy Tone
4. Congestion Tone
5. Special Information Tone
6. Warning Tone
7. Reorder Tone
8. Confirmation Tone
9. Call Waiting Tone
ƒ Low Freq [Hz] – Frequency in hertz of the lower tone component in case of dual
frequency tone, or the frequency of the tone in case of single tone.
ƒ High Freq [Hz] – Frequency in hertz of the higher tone component in case of dual
frequency tone, or zero (0) in case of single tone.
ƒ Low Freq Level [-dBm] – Generation level 0 to -31 dBm.
ƒ High Freq Level – Generation level 0 to -31 dBm. The value should be set to 32
(mute) in the case of a single tone.
ƒ First Signal On Time [10 msec] – Signal On period (in 10 ms units) for the first
cadence on-off cycle.
ƒ First Signal Off Time [10 msec] – Signal Off period (in 10 ms units) for the first
cadence on-off cycle.
ƒ Second Signal On Time [10 msec] – Signal On period (in 10 ms units) for the
second cadence on-off cycle.
ƒ
Second Signal Off Time [10 msec] – Signal Off period (in 10 ms units) for the
second cadence on-off cycle.