3Com VCX V7122 SIP, Руководство пользователя

Страница: 61 / 176

3Com VCX V7122/SIP VoIP Gateway User Manual
61
C
HAPTER
5: P
ROVISIONING
Provisioning for SIP Operation
The VCX V7122/SIP Gateway initial configuration is provided by the Mediant.ini configuration
file. If required, the INI file is downloaded using BootP and TFTP procedures. The INI file
name is provided in the Boot File Name field of the BootP Server.
To create an INI file, it is recommended to use the Excel utility provided. To use the Excel
utility, first install the Microsoft Office 2000 Excel application.
The INI file contains the following information relevant to SIP:
ƒ Basic and Logging Parameters shown in Table 16 .
ƒ E1/T1 Configuration Parameters shown in Table 17 on page 65.
ƒ Channel Parameters shown in Table 18 on page 73.
ƒ SIP parameters shown in Table 19 on page 77.
ƒ Names for Call Progress Tone file, CAS Signaling file and optional Voice prompts file.
For detailed information, see “ Loading Call Progress Tones and E1/T1 CAS
Configuration Files ”.
The file names in INI file must be enclosed in quotation marks (‘…’).
All INI file data is downloaded at startup and stored in non-volatile memory. The provisioning
procedure should be used again only to modify VCX V7122/SIP parameters; otherwise, the
BootP and TFTP procedures are not needed again.
The Default Channel Parameters are applied to all VCX V7122/SIP channels.
You do not have to specify all parameters, as each unspecified parameter is set to its default
value. Using the INI file resets all unspecified parameters to their default values.
The Channel Parameters define the DTMF, fax, and modem transfer modes. See “ Appendix
D: DTMF, Fax, and Modem Transport Modes ” for a detailed description of these modes.