3Com VCX V7122 SIP, Руководство пользователя

Страница: 62 / 176

62
3Com VCX V7122/SIP VoIP Gateway User Manual
Basic, Logging and Web Parameters
In Table 16 , where there are parameters shown in brackets they refer to the format
in the Embedded Web Server
*
.
Table 16
Basic and Logging Parameters
INI File Field Name
GUI Parameter Name
*
Valid Range and Description
MGControlProtocolType 8 = for SIP Gateway
EthernetPhyConfiguration 0 = 10 Base-T half-duplex
1 = 10 Base-T full-duplex
2 = 100 Base-T half-duplex
3 = 100 Base-T full-duplex
4 = auto-negotiate (Default)
Auto-negotiate falls back to half-duplex mode (HD) when the opposite port
is not in auto-negotiate, but the speed (10 Base-T, 100 Base-T) in this
mode is always configured correctly.
DNSPriServerIP
(Network Settings>DNS
Primary Server IP)
IP address of primary DNS server
DNSSecServerIP
(Network Settings>DNS
Secondary Server IP)
IP address of secondary DNS server
DHCPEnable
(Network Settings>Enable
DHCP)
0 = Disable (default)
1 = Enable
After the Gateway is powered up, it first tries to communicate with the
BootP server. If the BootP server is not responding and DHCPEnable =1,
the Gateway sends a DHCP request to configure its IP address and other
network parameters from the site DHCP server.
The DHCPEnable is a special Hidden parameter. Once defined and saved
in the flash memory, it is used even if it does not appear in the INI file.