3Com VCX V7000, Руководство по установке и обслуживанию

Страница: 55 / 144

3
I
NSTALLATION
S
CRIPTS FOR
T
WO
S
ERVER
P
AIRS
This chapter describes how to configure a VCX system that includes one
pair of servers that run most of the VCX components and another pair
that run the Unified Messaging System (UMS). The installation scripts run
when each server is started for the first time. Each time the script prompts
you for a response, you can accept the default value by pressing the Enter
key, or you can enter a different value.
At the end of each section of the script, you can accept all of the answers
that you have entered or you can go back and make changes.
Make sure all the procedures outlined in the Chapter 1 , “Pre-Installation”
have been completed before continuing with this chapter.
This chapter contains information on the following:
■
Overview of Components
■
Installation Scripts
■
Sample Network Parameters
■
Sample Network and Initial Configuration Script (Primary VCX
Server)
■
Modifying the Hosts File (Primary VCX Server)
■
Sample Network and Initial Configuration Script (Secondary VCX
Server)
■
Modifying the Hosts File (Secondary VCX Server)
■
Sample Network and Initial Configuration Script (Primary UMS
Server)
■
Sample UMS Installation Script (Primary UMS Server)
■
Sample Network and Initial Configuration Script (Secondary UMS
Server)
■
Sample UMS Installation Script (Secondary UMS Server)