Configuring Class of Service
83
5 Once the Range Start, Range End, and Protocol are
entered press Add.
The range is added to the list, as shown in Figure 19.
Figure 19
Additional Ranges Window Showing Data
6 Click OK when you are finished.
To remove a range, select the range in the list and
click
Remove
.
7 Restart the computer.
Using Class of Service Advanced Options
You can use Class of Service Advanced Options to adjust the
network driver’s handling of certain types of Class of Service
traffic. The advanced options are set to certain default values
recommended by 3Com. In general, you do not need to
change these values, but you can do so if you wish. Contact
network administration before changing these options.
