36
C
HAPTER
3: N
OVELL
N
ET
W
ARE
E
NVIRONMENTS
4 Mbps; a setting of 16 forces the driver to always open
the connection at 16 Mbps.
The keyword CLASSIC sets the transmit/receive mode to the
half-duplex Token Passing Protocol (TKP). The keyword DTR
sets the transmit/receive mode to the full-duplex Transmit
Immediate Protocol (TXI). Operating in TXI mode is
recommended; if full-duplex mode fails, try TKP mode.
Installing DOS Client32
This section describes installing the TLNKPODI.LAN DOS
Client32 driver for a NetWare Client32 environment. For
the driver installation procedure, you need the Novell
Client32 diskettes and either the
TokenLink Velocity XL
CD
or
TokenDisk
diskette 2.
1 Insert the Novell Client32 setup diskette 1 into a
drive, switch to that drive, and enter the Install
command. For example, if the diskette is in drive A,
enter:
a:\install
2 Read the Novell information window and press Enter.
The displayed window lists installation options.
3 Use the arrow keys to move to the options you need.
Press the spacebar to select the option.
The system prompts you for configuration information.
4 Confirm the configuration and press Enter.
5 If your configuration requires TCP/IP, supply the
IP Address, Router, Subnet Mask, DNS Domain, and
Domain Name Server Address. Press Enter.
6 When prompted for the LAN Driver type, select 32-bit
and press Enter.
The 32-bit Network Board Drivers window is displayed.
7 When prompted to select the driver, scroll to User
specified 32-bit driver.
8 Insert TokenDisk diskette 2 in the drive or the
TokenLink Velocity XL CD in the CD-ROM drive.
