Installing a 3C359B NIC Driver for Windows Environments
63
5 In the Select Network Adapter dialog box, click
Have Disk.
The Insert Disk dialog box appears.
6 If you are using the 3.5-inch diskettes, insert
TokenDisk diskette 2 in the drive. If you are using the
TokenLink Velocity XL CD, insert it in the CD-ROM
drive.
7 Accept the displayed default path by clicking OK.
For example, if you are using the 3.5-inch diskettes, the
following path is displayed:
a:
This path identifies the location of the driver files
for Windows NT 4.0. The Select OEM Option dialog
box appears.
8 Select 3Com TokenLink Velocity XL PCI Adapter and
click OK.
9 Verify that 3Com TokenLink Velocity XL PCI Adapter
appears in the list in the Network Adapters tab and
click Close.
If your network environment uses the TCP/IP
communications protocol, the Microsoft TCP/IP Properties
dialog box is displayed. You must obtain from your
network administrator all the information you need to
define an IP address during the installation process.
Continue after you have defined the NIC for TCP/IP.
Bindings messages appear, followed by a prompt to restart
the computer.
10 Remove the TokenDisk diskette or TokenLink
Velocity XL CD from the drive.
11 Click Yes to restart the computer.
This concludes the procedure for installing the driver for
Windows NT 4.0. To confirm successful installation, see
“Verifying Successful Installation” on page 65.
To disable auto ring speed detection and manually select
the ring speed, see “Setting Ring Speed for Windows NT
4.0”
on page 70 for more details.
