3Com Switch 7754, Руководство по настройке

Страница: 47 / 940

Console Port Login Configuration with Authentication Mode Being Scheme 47
Configure to authenticate users locally
or remotely authentication-mode
scheme
[ command-
authorization ]
Required
The specified AAA
scheme determines
whether to authenticate
users locally or
remotely.
Users are authenticated
locally by default.
Configure the
Console port Set the baud rate speed speed-value Optional
The default baud rate of
the AUX port (also the
Console port) is 9,600
bps.
Set the check mode parity { even | mark |
none | odd | space }
Optional
By default, the check
mode of a Console port
is set to
none , that is,
no check bit.
Set the flow control
mode flow-control { hardware
| none | software }
Optional
By default, a Console
port does not perform
flow control.
Set the stop bits stopbits { 1 | 1.5 | 2 } Optional
The default stop bits of
a Console port is 1.
Set the data bits databits { 7 | 8 } Optional
The default data bits of
a Console port is 8.
Configure the command level available
to users logging into the user interface user privilege level level Optional
By default, commands
of level 3 are available
to users logging into the
AUX user interface.
Make terminal services available to the
user interface shell Optional
By default, terminal
services are available in
all user interfaces.
Set the maximum number of lines the
screen can contain screen-length
screen-length
Optional
By default, the screen
can contain up to 24
lines.
You can use the
screen-length 0
command to disable the
function to display
information in pages.
Table 18 Console port login configuration with the authentication mode being scheme
Operation Command Description