3Com Switch 7754, Руководство по настройке

Страница: 40 / 940

40 C
HAPTER
3: L
OGGING IN THROUGH THE
C
ONSOLE
P
ORT
Configure the
Console port Set the baud rate speed speed-value Optional
The default baud rate of an
AUX port (also the Console
port) is 9,600 bps.
Set the check
mode parity { even | mark |
none | odd | space }
Optional
By default, the check mode
of a Console port is set to
none , that is, no check bit.
Set the flow
control mode flow-control { hardware |
none | software }
Optional
By default, a Console port
does not perform flow
control.
Set the stop bits stopbits { 1 | 1.5 | 2 } Optional
The stop bits of a Console
port is 1.
Set the data bits databits { 7 | 8 } Optional
The default data bits of a
Console port is 8.
Configure the command level
available to users logging into the
user interface user privilege level level Optional
By default, commands of
level 3 are available to users
logging into the AUX user
interface.
Make terminal services available shell Optional
By default, terminal services
are available in all user
interfaces.
Set the maximum number of lines
the screen can contain screen-length
screen-length
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0 command
to disable the function to
display information in
pages.
Set the history command buffer
size history-command
max-size
value
Optional
The default history
command buffer size is 10.
That is, a history command
buffer can store up to 10
commands by default.
Table 14 Console port login configuration with the authentication mode being none
Operation Command Description