16
O
FFICE
C
ONNECT
ISDN LAN M
ODEM
R
ELEASE
N
OTE
V. 6.2.0 (ST)
AND
5.3.0 (U)
Figure 9
Dial-in Users Parameters Screen
3
In the Name field, enter a unique name to designate this dial-in user. This value
should correspond with the username configured on the client.
4
In the Password field, enter a password to verify access when this user dials into
the LAN Modem. This value should correspond with the password configured on
the client.
5
In the Type of Use field, select the scenario for which your dial-in situation applies.
Refer to “Understanding the Three Dial-in Scenarios” for more information.
■
Choose
Single-User Dial-in
if this user will be accessing the LAN Modem
from an ISDN terminal adapter or from another LAN Modem on which
attached workstations will share a single IP address.
■
Choose
LAN Modem Site-to-Site
if this user will be dialing in from another
LAN Modem which utilizes bidirectional LAN-to-LAN connectivity.
■
Choose
Advanced
if this user will be accessing the LAN Modem from a
router other than a LAN Modem. This scenario requires that all IP addresses
be statically configured, and should be configured by your MIS
administrator.
