![background image](http://html1.mh-extra.com/html/3com/ocg-voice-expansion/ocg-voice-expansion_user-manual_440820071.webp)
Configuring PPP-based WANs
6 - 13
PPP
Configuration
Procedure
To configure your WAN settings for a PPP Configuration, perform the
following steps:
1
Select
Create
from the
PVC Name Edit Mode
drop-down menu. If no
WAN interface has previously been configured, the field will already be
set to
Create
.
2
Enter a name for your PVC (Permanent Virtual Circuit) in the
PVC Name
field. This is the name for the WAN you are configuring. The PVC is the
circuit that will be used to form the connection between the LAN and
WAN sides of the OfficeConnect Gateway.
3
Select the appropriate PPP protocol (
PPPoe, PPPoA (LLC-SNAP), or PPPoA
(VC-Mux))
from the
WAN Protocol
drop-down menu.
4
Select
Create New PPP User
from the
WAN Users Edit Mode
drop-down
menu. This should be the default selection. To configure a PPP WAN
connection, you must have a valid PPP User Account with your Service
Содержание OCG VOICE EXPANSION -
