3Com Fast EtherLink 3C515-TX, Руководство пользователя

Страница: 22 / 80

3-2 C
HAPTER
3: I
NSTALLING THE
N
OVELL
N
ET
W
ARE
D
RIVER
Go to the section for your PC operating system in this
chapter for instructions that describe how to install the
NetWare driver on your PC.
Installing the Novell NetWare Client Driver
In a Novell NetWare environment, the network driver is
installed on a PC running one of these operating systems:
■
DOS
■
OS/2
■
Windows 3.x
■
Windows for Workgroups
■
Windows 95
DOS and Windows 3.x
This section describes how to install the NetWare driver
for a PC running DOS or Windows 3.x. You can use the
3Com Intelligent Auto Install software program to install
the NetWare DOS ODI client software automatically,
including the driver, and to modify the CONFIG.SYS and
AUTOEXEC.BAT files.
In addition, to use the Intelligent Auto Install program,
your PC must meet these requirements:
■
Use the Novell NetWare 3.12 or 4.10 network
operating system
■
Have only one 3C515-TX NIC installed
■
Be intended for use as a NetWare client
To use the Intelligent Auto Install program, follow these
steps:
1 Make sure the 3C515-TX NIC is installed and
connected to the network as described in Chapter 2.
2 Boot the PC under DOS.
3 Insert the EtherDisk diskette in drive A and type the
following at the DOS prompt:
a:\comslink [Enter]