background image

ii

3Com Corporation
5400 Bayfront Plaza 
Santa Clara, California 
95052-8145

Copyright © 1998, 3Com Corporation. All rights reserved. No part of this documentation may be reproduced 
in any form or by any means or used to make any derivative work (such as translation, transformation, or 
adaptation) without written permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content from time 
to time without obligation on the part of 3Com Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty, term, or condition of any kind, either 
implied or expressed, including, but not limited to, the implied warranties, terms or conditions of 
merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make improvements or 
changes in the product(s) and/or the program(s) described in this documentation at any time.

If there is any software on removable media described in this documentation, it is furnished under a license 
agreement included with the product as a separate document, in the hard copy documentation, or on the 
removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, 
please contact 3Com and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the software described herein are 
provided to you subject to the following: 

All technical data and computer software are commercial in nature and developed solely at private expense. 
Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or 
as a “commercial item” as defined in FAR 2.101(a) and as such is provided with only such rights as are 
provided in 3Com’s standard commercial license for the Software. Technical data is provided with limited rights 
only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. 
You agree not to remove or deface any portion of any legend provided on any licensed program or 
documentation contained in, or delivered to you in conjunction with, this User Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may 
not be registered in other countries.

3Com, the 3Com logo, Net Age, NETBuilder II, SuperStack, Transcend, and TranscendWare are registered 
trademarks of 3Com Corporation. ATMLink, CoreBuilder, are trademarks of 3Com Corporation. 3ComFacts is 
a service mark of 3Com Corporation.

CompuServe is a registered trademark of CompuServe, Inc. Microsoft, MS-DOS, Windows, and Windows NT 
are registered trademarks of Microsoft Corporation. 

HP OpenView is a registered trademark of Hewlett-Packard Company. SunNet Manager is a trademark of the 
Sun Microsystems, Inc.

All other company and product names may be trademarks of the respective companies with which they are 
associated.

Document designed and written by Laura Novich, photography by Oren Ben-Ami. Production by 3Com.

Содержание COREBUILDER 7000HD

























Отзывы: