3Com Switch 8800 Configuration Guide
Chapter 43 File System Management
43-5
will begin the initialization with the default parameters. Relative to the
saved-configuration, the configuration in effect during the operating process of the
system is called current-configuration. You can use the following commands to display
the current-configuration and saved-configuration information of the Ethernet switch.
Perform the following configuration in any view.
Table 43-5
Display the configurations of the Ethernet switch
Operation
Command
Display the saved-configuration
information of the Ethernet switch
display saved-configuration
Display the current-configuration
information of the Ethernet switch
display
current-configuration
[
controller
|
interface
interface
-
type
[
interface
-
number
] |
configuration
[
configuration
] ] [ |
{
begin
|
exclude
|
include
}
regular
-
expression
]
Display the running configuration of
the current view
display this
Note:
The configuration files are displayed in their corresponding saving formats.
43.2.3 Modifying and Saving the Current-Configuration
You can modify the current configuration of Ethernet switch through the CLI. Use the
save
command to save the current-configuration in the Flash Memory, and the
configurations will become the saved-configuration when the system is powered on for
the next time.
Perform the following configuration in user view.
Table 43-6
Save the current-configuration
Operation
Command
Save the current-configuration
save
[
file
-
name
]
Even if the problems like reboot and power-off occur during , the configuration file can
be still saved to Flash.
