3Com 6.3, Руководство по установке

Страница: 11 / 39

10 C
HAPTER
1: B
EFORE
Y
OU
B
EGIN
Your system is now ready to install Transcend.
Table 5 Installation Checklist
Transcend has been installed and is ready to be prepared for operation.
Table 6
Post-installation Checklist
Transcend has been installed and prepared for operation. To begin, see
Introducing Transcend Networking
for details.
Workstation
Requirements
This section describes system requirements needed to run Transcend.
Hardware
Requirements
This section describes the workstation hardware requirements.
■
Intel (or 100% compatible) 200 MHz Pentium or faster microprocessor
■
64MB RAM minimum (128 MB recommended)
■
1 GB minimum hard disk space available on a single drive (drive does
not need to be the primary drive)
■
FAT16 or NTFS file system support
■
Paging file space should equal three times the RAM
To check paging file space, click Start , Settings , Control Panel ,
Performance , Virtual Memory . Ensure that the Maximum Size of the
paging file is equal to three times the RAM.
Check Task For detailed information see
Run installation of Transcend WorkGroup Manager
6.2 for Windows. “Installing Transcend Applications”
on page 14.
Check Task For detailed information see
Load the MIBs into OpenView if you didn’t load
the MIBs during installation. “Installing 3Com Enterprise MIBs”
on page 29.
Determine whether any 3Com patches have been
released for Transcend WorkGroup Manager 6.2
for Windows NT. “Additional Patches” on page 31.
Register Transcend. “Product Registration” on
page 31
.