3Com 4400, Руководство по началу работы

Страница: 50 / 86

50 C
HAPTER
3: S
ETTING
U
P FOR
M
ANAGEMENT
Web Interface
Management
Each Switch has an internal set of web pages that allow you to manage
the Switch using a Web browser remotely over an IP network (see
Figure 20 ).
Figure 20 Web interface management over the network
Refer to “Setting Up Web Interface Management” on page 52 .
SNMP Management You can manage a Switch using any network management workstation
running the Simple Network Management Protocol (SNMP) as shown in
Figure 21 . For example, you can use the 3Com Network Supervisor
software that is provided on the CD-ROM that accompanies your Switch.
Figure 21 SNMP management over the network
Refer to “Setting Up SNMP Management” on page 53 .
Setting Up
Command Line
Interface
Management
This section describes how you can set up command line interface
management using a local console port connection or over the network.
CLI Management via
the Console Port
To manage a Switch using the command line interface via the local
console port connection:
1 Ensure you have connected your workstation to the console port correctly
as described in
“Connecting to the Console Port” on page 42 .
2 Your Switch is now ready to continue being managed and/or configured
through the CLI via its console port.
DUA1720-3AAA05.book Page 50 Friday, March 7, 2003 11:53 AM