3Com 4400, Руководство по началу работы

Страница: 48 / 86

48 C
HAPTER
3: S
ETTING
U
P FOR
M
ANAGEMENT
Viewing IP Information via the Console Port
You are now ready to view the automatically allocated IP information
using the command line interface.
1 Connect your Switch to the network using an Ethernet cable. As soon as
a network connection is made the Switch begins the automatic IP
configuration process.
The automatic IP configuration process usually completes within one
minute.
If there is no response from a DHCP server within 30 seconds, the Auto-IP
configuration mechanism attempts to allocate the default IP address
169.254.100.100. If this address is not available, it then allocates an IP
address in the range of 169.254.x.y (where x is in the range 1 to 254, and
y is in the range 0 to 255).
2 The command line interface login sequence begins as soon as the Switch
detects a connection to its console port.
If the login prompt does not begin immediately, press Return a few times
until it starts.
3 At the login and password prompts, enter
admin
as your user name and
press Return at the password prompt. If you have logged on correctly, the
top-level menu of the command line interface is displayed as shown in
the example in
Figure 17 .
Figure 17 Example top-level command line interface menu
4 At the Select menu option prompt enter the
protocol ip
interface summary
command. At the
Select IP interfaces
prompt enter
all
. A summary of the automatically allocated IP
information is displayed. Make a note of the Network IP Address.
DUA1720-3AAA05.book Page 48 Friday, March 7, 2003 11:53 AM