Need to force speed and duplex settings.
In most cases, the automatic settings work fine.
However, if you need to force speed and duplex
settings to match those of an attached device:
1. Open Control Panel/Network.
2. Click the Adapters tab.
3. Select Link Settings and specify the desired
values.
Slow or dropped connection on a 10/100
switch.
The switch may be forced to 10Mbps. Open
Control Panel/Network. Click on the Adapters tab,
select Properties, and disable Auto Polarity.
Troubleshooting Windows NT 4.0 Installations
file:///C|/aaafiles/Garfield 26/L10N/User Guide/Source/Final/New Folder/3C575-22.htm (2 of 2) [10/26/1999 8:59:57 AM]